be_ixf;ym_201909 d_17; ct_50
skip to Main Content
Control Kit For Power Venter

Controls Kits For SWG Power Venters for Oil Fired Appliances

CK Control Kit–CK-61, CK-62, or CK-63–for Oil Fired Appliance Applications

CK Control Kits control the operation of SWG and CV Power Venters. CK Control Kits can also control the operation of Field Draft Inducers.

The CK-63 is used for all oil-fired systems, and may require optional delay oil valve for simultaneous burner operation. Designed for use on SWG Series Power Vent Hoods for controlling oil fired heating appliances with 120 VAC controls. The CK-63 control has the ability to operate the oil burner motor (up to 1⁄3 HP) and the venter at the same time. This allows for shorter post purge time. This feature requires the burner to be equipped with a delayed oil solenoid valve, which is not supplied with this kit.

Control Kits are ETL approved accessories when used in conjunction with the SWG Power Venter.

How Do Thermal Safety Switches Work?

The Thermal Safety Switch detects the increased heat generated by the flue gas spillage and deactivates the furnace or boiler. It will not allow the burner to restart until the switch has been manually reset.

What Control Kit Do I Use For An Oil Burning Appliance?

Refer to the Contractor Reference Guide to select the proper kit for your application.

Specifications

PART # MODEL APPLICATION DRAFT PROVING SWITCH GAS PRESSURE SWITCH SECONDARY SAFETY SWITCH THERMAL POST PURGE ADJUSTABLE ELECTRONIC POST PURGE FIXED POST PURGE DRAFT CONTROL RJR-6
46399363 CK-63 All oil-fired systems. (May require optional delay oil valve for simultaneous burner operation.) x
x
x


Stay in Touch, Stay Informed
Back To Top