fbpx skip to Main Content
fan in a can Control kits gas

Controls Kits For Power Venters for Gas 30mv Fired Appliances

Proper Control Kits–CK-20FV for Gas 30mv Fired Appliance Applications

Control Kits (CK) control the operation of SWG and CV Power Venters. Control Kits can also control the operation of Field Draft Inducers.

Control kits for gas heating appliances include the CK-20Fv.  The CK-20FV is used for 30 millivolt gas-fired water heaters and gas-fired pool or spa heaters with a manual or internally mounted thermostat.

Control Kits are ETL approved accessories when used in conjunction with the SWG Power Venter.

How Do Thermal Safety Switches Work?

The Thermal Safety Switch detects the increased heat generated by the flue gas spillage and deactivates the furnace or boiler. It will not allow the burner to restart until the switch has been manually reset.

What Control Kit Do I Use For An Oil Burning Appliance?

Refer to the Contractor Reference Guide to select the proper kit for your application.

What is a Thermal Safety Switch or Thermal Cutoff Switch?

A thermal safety switch or thermal cutoff switch is an electrical safety device that interrupts electric current when heated to a specific temperature. These devices may be for one-time use or may be reset manually or automatically. These switches are use on barometric draft controls and draft hoods to detect flue gas spillage and deactivate oil and gas burners. These switches cut off the current to critical heating appliances when a temperature limit is exceeded preventing potential burn out or failure.

Specifications

PART # MODEL APPLICATION DRAFT PROVING SWITCH GAS PRESSURE SWITCH SECONDARY SAFETY SWITCH THERMAL POST PURGE ADJUSTABLE ELECTRONIC POST PURGE FIXED POST PURGE DRAFT CONTROL RJR-6
46282620 CK-20FV 30 millivolt gas-fired water heaters and gas-fired pool or spa heaters with a manual or internally mounted thermostat. x
x
x

Back To Top
STAY IN TOUCH, STAY INFORMED
Field Controls Logo