Skip to content
Make-up Air Sensors
Make-up Air Sensors
Make-up Air Sensors
Make-up Air SensorsMake-up Air Sensors

Highlights of the Make-up Air Sensors

  • CERTIFIED: Meets ventilation standard ASHRAE 62.2
  • PERFORMANCE: Senses the operation of air exhaust devices
Features of the Heat Recovery Ventilators

Make-up air sensors are air pressure sensors that sense a change in air pressure within the exhaust duct of an exhausting device, such as a kitchen range hood, clothes dryer, central exhaust system, etc. It transmits a signal to a make-up air system, such as the Fresh Air Ventilation Control ventilation system, in order to provide make-up air for the exhausting device. The P-Sensor may also be used in a stand-alone passive make-up air system to control a 24V fresh air damper (FAD) that is ducted to the exterior of the structure. The P-Sensor may also be used in a stand-alone makeup air system to control a 24V fresh air damper and/or fan that is ducted to the outdoors.

Better Control in Any Environment. The Fresh Air Ventilation Control (FAVC) can monitor up to four exhaust fan appliances like a bathroom fan, range hood, clothes dryer and gas fireplace. Our C-Sensor and P-Sensor relays data back to the FAVC which can then adjust fresh air intake. Each sensor works independently or in concert with the others to monitor environmental changes, providing increased or decreased ventilation as needed.C-Sensor and P-Sensor relays data back to the controls, like the Fresh Air Ventilation Control (FAVC), which can then adjust fresh air intake. Each sensor works independently or in concert with the others to monitor environmental changes, providing increased or decreased ventilation as needed.

The C-Sensor senses the operation of air-exhausting devices, such as range hoods, clothes dryers, bathroom fans, central vacuum systems, etc. It acts as a switch to provide a 24 VAC input signal to the Fresh Air Ventilation Control (FAVC), which then operates the fresh air damper (FAD) and activates the HVAC central fan. Fresh, outside air is then drawn into the house, providing make-up air for the exhausting device(s). The C-Sensor may also be used in a stand-alone make-up air system to control a 24V fresh air damper.

Make-up air sensors should be installed by a licensed contractor. Find a contractor in your area.

Specifications of the Make-up Air Sensors
Specifications
Model Part Number Voltage Watts
C-Sensor 46676600 24 3
P-Sensor 46676500 24 3
CONTACT US FOR ADDITIONAL INFORMATION ON THE MAKE-UP AIR SENSORS
Customer Service Rep

Phone
252.522.3031

Address
2630 Airport Road
Kinston, NC 28504

Back To Top