Chimney Top Draft Inducers
Type C Chimney Top Draft Inducers For Wood/Gas/Coal Fireplaces
When Do I need a Chimney Draft Inducer?
The Type C Chimney Fan is the solution to preventing smoking fireplaces. It provides negative pressure to overcome the effects of wind, cold chimneys, insufficient chimney height, and downdraft. Field Controls Type C Chimney Draft Inducers are designed for wood, coal, and gas fireplaces and are available in four sizes: 6″, 8″, 10″, and 13″. They are insulated to withstand peak temperatures up to 1300 degrees F and operate continually at 900 degrees F without overheating the motor windings or bearings. Can operate with a standard manual on-off switch, or can be installed with a variable speed motor control. The Type C Draft Inducer is effective when venting standard fireplaces and freestanding gas fireplaces.
When Do I Use a Type C Chimney Draft Inducer?
The Type “C” Chimney Top Draft Inducer is designed for installation on smoke pipes, Type” B” vents, Type “L” vents and factory built Class “A” chimneys. The Type “C” Draft Inducer is installed on the top of the vent system outside of the building.
Refer to the Chimney Draft Inducer Model: Type C installation manual.
|PART #||MODEL||DIMENSIONS (ins.)||MAXIMUM HEARTH OPENING||VOLTS||AMPS||WATTS||HZ||RPM|
|04053100||8"C||7.94||16.00||3.38||14.75||7 sq. ft.||115||0.81||57||60||1550|
|46298200||10"C||10||16||3.38||14.75||12 sq. ft.||115||3.75||252||60||1050|
|04334500||13"C||13||16||3||14.75||30 sq. ft.||115||3.75||252||60||1050|