SWG-3 and SWG-4HD Power Venters
Controlling the SWG-3 Power Venter and 4HD Power Venter Just Got Easier!
Field Controls makes it easy to install a model SWG-3 Power Venter and model 4HD Power Venter. The SWG must be sized to match the appliances or appliances’ input firing rate. Most firing rates are published in the manufacturer’s installation manual. The SWG must be installed with a CK Control Kit to ensure proper listing and safe, efficient venting. These kits make it easy.
The SWG-3WH and SWG-4WH Power Venters come packaged with a CK-20FV Control Kit.
Patented SWG Power Venters are ETL and cETL listed for all LP gas, natural gas, or oil-fired heating equipment.
What Control Kit Do I Use For An Oil Burning Appliance?
Refer to the Contractor Reference Guide to select the proper kit for your application.
NOTE: This device MUST be installed by a qualified agency in accordance with the manufacturer’s installation instructions. The definition of a qualified agency is: any individual, firm, corporation or company which either in person or through a representative is engaged in, and is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the precautions required, and has complied with all the requirements of the authority having jurisdiction.